Porcelain floor tiles are one of the simplest forms of flooring to clean in a house or workplace. To keep it clean and clear of dirt and stains, all you need to do is sweep or vacuum it at least once a week. While porcelain is very simple to clean and preserve, it is not completely impervious to these strong stains and other pollutants. Therefore, how do you clean floor tiles? In this post, we’ll walk you through the stages involved in cleaning various varieties of porcelain floor tiles.
Cleaning Porcelain Floor Tiles of Various Types
Tiles That Are Not Polished
- Sweep and vacuum the area prior to cleaning to remove any loose dirt.
- Clean the floor tile using a floor tiles cleaner and hot water. Allow the mixture to rest on the floor for about 5 to 10 minutes. It is critical to immediately remove the solution to prevent it from drying directly on the surface. learn more about floor tile cleaning at https://www.hgtv.com/lifestyle/clean-and-organize/how-to-clean-ceramic-tile-floors
- Scrub the cleaning substance with an abrasive pad or a nylon-bristled brush to remove difficult and tenacious stains. If your floor tiles area is quite modest, a little brush scrub would suffice.
- Rinse the floor well with clean, clear water to remove the cleaning solution. This may be accomplished with a mop or a vacuum cleaner.
- Allow the whole floor area to dry naturally.
Polished Ceramic Floor Tiles
- Sweep the floor to remove any dust or grime that has accumulated on the surface. Following that, sweep up any remaining loose dirt.
- Mop the floor tiles with a light cleaning solution to give them a lovely shine. The solution or detergent must be used in a proportion of 50% less than what is used to clean an unpolished porcelain tile floor.
- Rinse the cleaning solution away with clean water.
- Wipe the floor area dry to bring out the sheen and luster of the surface and to avoid the formation and settlement of water stains.
Textured Tiles
- Sweep and vacuum away loose debris from the textured porcelain floor tiles. To efficiently clean the floor tiles, begin sweeping in two directions with a soft-bristled broom. After that, suction out any leftover particles using a vacuum cleaner.
- Clean the floor with a neutral cleaning solution and hot water mixture. Allow it to settle for about 5 to 10 minutes on the surface. Following that, begin cleaning the floor in two separate ways using a brush. learn more about natural cleaning solutions by clicking here
- Thoroughly clean the floor by rinsing it with clean, clear water.
- To keep the floor shining and clean, scrub and mop it at least once a day using a light floor cleanser.
The Do’s and Don’ts of Porcelain Floor Cleaning
- Never clean porcelain floors with ammonia or any bleach-acid solution. These materials have abrasive qualities and may degrade the surface, causing the grout color to alter.
- Avoid cleaning chemicals that include oil-based detergents, wax cleaners, or sealants
- Avoid cleaning substances that involve dye or coloring.
- Don’t forget to install mats at entrances to keep more dirt off the floor tiles.
- Avoid using steel wool pads for cleaning since they may cause damage to the floor and rust spots in the grout.
Maintaining a Clean and Shiny Floor
- While larger is not always better, it is definitely easier. Floor tiles that are larger in size are considerably simpler to install than those that are little. Larger tiles are often used in bathrooms, but they also work well in kitchens and other spaces. Because the smaller 1x1s will take longer to set, consider a simple design.
- What you are unable to perceive will do you harm. Without a level subfloor, no installation will be successful. Self-leveling subfloor material performs well and is simple to install for the do-it-yourselfer. Additionally, plywood or cement backer board may be utilized, but regardless of the material chosen, the subfloor should be at least 1 inch thick “thick to provide a professional finish.
- It’s as simple as 3-4-5 to square a space. A 3-4-5 triangle is the optimal approach for squaring a room. Measure 3 feet against one wall, 4 feet to the room’s center, then join the two lines with a 5-foot line to form a triangle. Use 6-, 8-, and 10-foot lines if the space is bigger. If it is less than 18″, 24″, or 30″, use 18″, 24″, and 30″ “‘. All lines should be marked off by snapping a chalk line along with the measures.
- Find a way to make the most of a bad circumstance. Not only can thin-set hold floor tiles in place on the floor, but it may also compensate for slight subfloor faults. There are a variety of thin sets available for various types of tile, but for ceramic tile, a latex-modified thin set is recommended. Water is all that is required for latex modified thin-set. Bear in mind that you should only combine what can be dispersed or utilized within an hour; otherwise, the work will become quite difficult. Additionally, there is a premixed thin-set that is better suited for wall tiles. It is more adherent, and the floor tiles will not move as much. With a thin-set, you can always add a bit more on one side or subtract a little on the other to level the subfloor.
- If you’re looking to save money, rent a wet saw. Renting one saves you time and aggravation. Unless you have an ideal home with ideal rooms, you will need to trim the tiles. The time saved by correctly cutting all of the tiles will quickly pay off. Wet saws are reasonably priced and are often available at any home supply shop.
- Avoid rushing into a bad job. Always take your time and work in a limited area to ensure everything is completed properly. Each high-quality tile installation is the result of an installer who opted to take his time. Even if you are working in a tiny area, take your time laying the floor tiles.
Final thoughts
The tips mentioned in this article will assist you in cleaning floor tiles easily.
Also read: Plumbing Systems for using well water
